
How to make bath bombs from scratch
A few years ago, I found myself in a situation where I needed a bath bomb.
I was traveling with a boyfriend and we were both doing a lot of research about the basics of bath bombs.
I wanted to make my own bath bomb, but there were no easy tutorials on how to make a bathbomb from scratch.
I didn’t know how to find a good recipe online, or even if I could get one.
I went to my local thrift store and picked up a few items of clothing and some cheap electronics.
I then spent a day making a few DIY bath bombs that turned out great.
After doing my research, I ended up buying several bath bombs online and getting them shipped to me.
I used the instructions provided on those websites to make the bath bombs I made for the trip, but I was surprised at how much easier they turned out.
Here are my top tips on how I made my own DIY bath bomb:1.
Buy the right materials.
I bought a few pieces of the cheapest materials I could find: cheap kitchenware and a few boxes of paper towels.
I found that the worst thing to buy was a plastic bag, which can be very expensive and will only last a couple of days.
The best way to get the best bang for your buck is to buy a tub of cheap plastic or glass and buy a large enough container to fit all the water in. 2.
Cut and sew the parts together.
You want to make sure that the parts are cut from the same material.
If they are not, you won’t be able to use them.
Also, you want to sew the seams together to prevent them from sticking together.
3.
You need to cut the tub up into four pieces, and place them all in the container.
There is a big difference between cutting an object like a tub, and a bathtub.
I cut a piece of the tub and then used a sharp knife to cut a hole through the top of it to seal the seams.
4.
Then, I put the two sides together and sewed the seams closed with a pair of tweezers.
I made sure that they were all sealed together and that I had all of the pieces in place.
5.
Next, I took the pieces and put them in a large plastic bag.
I placed the two halves of the bag in a plastic container and sewn the seams in.
I took my two pieces and cut them into four strips, and then put them all into the container again.
I sewed all of my seams closed and seamed the pieces together.
I put my pieces in a huge plastic container, and filled the container up with water.
6.
Now that the bath tub is in the water, I need to put on the clothes.
I lined the inside of the container with a plastic sheet and put the clothes on.
Once all of them are on, I sealed the container and put it in the freezer for two weeks.
Once that was done, I washed them in cold water and put on some clothes.
7.
I then used the same plastic container to put the bath mat and my other items into.
The two sides of the mat were cut into four sections and the three corners were sewn together.
Once all of those pieces were sewed together, I placed a piece on top of the bathmat and sealed it with a piece that was the same size as the water bath mat.
8.
Finally, I used my fingers to sew my bath mat onto the top and bottom of the containers, which were then sealed with the same piece that I put in the refrigerator.
I left the rest of the materials alone to dry, so they wouldn’t absorb the cold.
9.
After two weeks, I cleaned the bathtub and put a few clothes in it.
After a few days, I added a few extra towels to the bath and put some extra towels in the back of the tank.
10.
The end result was perfect!
If you are interested in more tips on making bath bombs or would like to see more DIY tutorials, be sure to check out my DIY Bath Bomb Guide and my Black Bath Bomb Guide for more inspiration!